9″ x 42″ KENT USA KTM-3SMANUAL KNEE MILL – NEW
PRODUCT FEATURES
- 3 HP spindle motor, 16 speeds step pulley milling head
- 9” x 42” hardened and ground table
- Table, saddle, and knee with hardened and ground dovetail ways
- Precision ground leadscrews with backlash compensating double nut
- Precision bored and ground milling head, with super precision ABEC-7 bearings
- Meehanite® casting, with built in coolant reservoir in machine base
- Centralized one-shot lubrication, with metered check-valves
OPTIONAL ACCESSORIES
- Dro System
- Table (X-Axis) Power Feed
- Saddele (Y-Axis) Power Feed
- Knee (Z-Axis) Power Feed
- Air Power Drawbar
- Flood Coolant System
- Chip Tray
- Right Angle Milling Attachment w/ Arbor Support
- Rustlick Coolant (1 Gal., Mixes 1:30)
- Riser Blocks (4″/6″/8″)
- Angle-lock Vises (6″/8″)
- Rotary Table
- Clamping Kit (52pc)
- R-8 Collet Set
- Single Phase Motor Option
- NMTB-30 Spindle
- Table Size
- Table Travel (X-Axis)
- Saddle Travel (Y-Axis)
- Knee Travel (Z-Axis)
- Quill Travel
- Ram Travel
- Spindle Motor
- Spindle Speed
- Spindle Taper
- Quill Diameter
- Quill Feed Rate
- Drilling Capacity (Manual / Power)
- Boring Capacity
- Milling Capacity
- Maximum Work Load (Center)
- Spindle Nose to Table Surface
- Spindle Center to Column
- Net Weight
- Gross Weight
- Shipping Dimensions
- Power Requirements
KTM-3S
- 9″ x 42″
- 28″
- 12″
- 15″
- 5″
- 14.5″
- 3 HP
- 80–5440 RPM (16–Speeds)
- R-8
- 3.375″
- 0.0015″ / 0.003″ / 0.006″ in/rev
- 0.75″ / 0.37″ diameter
- 6″ diameter
- 2.0 in³/min
- 750 lbs
- 33″ – 18.25″
- 5″ – 19.5″
- 2200 lbs
- 2300 lbs
- 72″ x 72″ (skid)
- 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp)
