12″ x 50″ KENT USA KTM-5VVF-E MANUAL KNEE MILL – NEW
PRODUCT FEATURES
- 5 HP AC-Freq drive head with digital RPM display and analog load meter
- 60-550-4500 spindle RPM (Hi/Low gear). Automatic spindle direction reversal when switching between high and low speed gear ranges
- NMTB-40 spindle taper
- Automatic centralized lubrication system with metered check-valves
- Single-phase or 3-phase power without the need for a phase converter
- Hardened and Ground (Hrc-52) table surface and all slide ways
- Solid box ways on saddle and column
OPTIONAL ACCESSORIES
- Quick change tooling package (Mach-1)
- NMTB-30 spindle
- Flood coolant system (Built-in base)
- Knee (Z-axis) power feed
- Air power drawbar
- Flood coolant system
- Chip tray
- 3-D edge finder
- Knee linear encoder feedback for coupled z-axis position
- AMI with programmable M-functions
KTM-5VKF-E
- 12″ x 50″
- 33″
- 18″
- 15.25″
- 5.5″ (4″ w/MillPwr-3 CNC Control)
- 26.75″
- HP
- 60–500-4200 RPM (Var)
- NTMB-40
- 4.173″
- 0.0017″ / 0.0032″ / 0.0054″ in/rev
- 1.25″ / 0.625″ diameter
- 8″ diameter
- 2.5 in³/min
- 850 lbs
- 4″ – 19.5″
- 5.25″ – 32″
- 3700 lbs
- 4100 lbs
- 72″ x 72″ (skid)
- 220 Volts. 3 Phase, 60Hz, (10 Amp (Optional 440V, requires 8.5 Amp) Single Ph Available