9″ x 49″ KENT USA KTM-3VSF MANUAL KNEE MILL – NEW

SKU: 12797. Category: .

9″ x 49″ KENT USA KTM-3VSF MANUAL KNEE MILL – NEW

PRODUCT FEATURES

  • 3  HP spindle motor, variable speed milling head with AC-Frequency drive, digital RPM display, analog load meter, and automatic spindle direction reversal when switching between high & low speed ranges
  • 9” x 49” hardened and ground table top
  • T-slots ground parallel to table ways
  • Table, saddle, and knee with hardened and ground dovetail ways
  • Precision ground leadscrews with backlash compensating double nut
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite® casting, with built in coolant reservoir in machine base
  • Automatic lubrication, with metered check-valves

OPTIONAL ACCESSORIES

  • Digital Readout System
  • Table (X-Axis) Power Feed
  • Saddle (Y-Axis) Power Feed
  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant
  • Acu-Rite 200S DRO System (2-axis, 0.0002” resolution)
  • Right angle milling attachment with arbor support
  • # 30 taper spindle option
  • Rotary table (12”, vertical and horizontal)
  • Clamping kit (52 pc)
  • R-8 collet set (11 pc/set, 1/8” to 3/4″)
  • Upgrade to 440V power

 

  • Table Size
  • Table Travel (X-Axis)
  • Saddle Travel (Y-Axis)
  • Knee Travel (Z-Axis)
  • Quill Travel
  • Ram Travel
  • Spindle Motor
  • Spindle Speed
  • Spindle Taper
  • Quill Diameter
  • Quill Feed Rate
  • Drilling Capacity (Manual / Power)
  • Boring Capacity
  • Milling Capacity
  • Maximum Work Load (Center)
  • Spindle Nose to Table Surface
  • Spindle Center to Column
  • Net Weight
  • Gross Weight
  • Shipping Dimensions
  • Power Requirements

  • KTM-3VSF

  • 9″ x 49″ (Opt 10″ x 54″)
  • 35″
  • 12″
  • 15″
  • 5.5″ (4″ w/MillPwr-3 CNC Control)
  • 14.5″
  • 3 HP
  • 60–500-4200 RPM (Var) (60-6000 Opt)
  • R-8 (NMTB-30 or Q.C. spindle optional) Optionsal?
  • 3.375″
  • 0.0015″ / 0.003″ / 0.006″ in/rev
  • 0.75″ / 0.37″ diameter
  • 6″ diameter
  • 2.0 in³/min
  • 750 lbs
  • 2.75″ – 17.75″
  • 5″ – 27″
  • 2500 lbs
  • 2600 lbs
  • 72″ x 72″ (skid)
  • 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power

 

Recently Viewed