9″ x 49″ KENT USA KTM-3VS MANUAL KNEE MILL – NEW
PRODUCT FEATURES
- 3 HP spindle motor, 60-4200 infinitely variable speed milling head
- 9” x 49” hardened and ground table
- Table, saddle, and knee with hardened and ground dovetail ways
- Precision ground leadscrews with backlash compensating double nut
- Precision bored and ground milling head, with super precision ABEC-7 bearings
- Meehanite® casting, with built in coolant reservoir in machine base
- Centralized one-shot lubrication, with metered check-valves
OPTIONAL ACCESSORIES
- Quick change tooling package (Mach-1)
- NMTB-30 spindle
- Flood coolant system (Built-in base)
- Knee (Z-Axis) Power Feed
- Air Power Drawbar
- 3-D Edge Finder
- Flood Coolant System
- Chip Tray
- Knee Linear Encoder Feedback for Coupled Z-Axis Position
- AMI with programmable M-functions
- Table Size
- Table Travel (X-Axis)
- Saddle Travel (Y-Axis)
- Knee Travel (Z-Axis)
- Quill Travel
- Ram Travel
- Spindle Motor
- Spindle Speed
- Spindle Taper
- Quill Diameter
- Quill Feed Rate
- Drilling Capacity (Manual / Power)
- Boring Capacity
- Milling Capacity
- Maximum Work Load (Center)
- Spindle Nose to Table Surface
- Spindle Center to Column
- Net Weight
- Gross Weight
- Shipping Dimensions
- Power Requirements
KTM-3VS
- 9″ x 49″ (Opt 9″ x 42)
- 35″ (31″ w/CNC Control) (28″/24″ Opt)
- 12″ (11″ w/ CNC Control)
- 15″
- 5″ (4″ w/MillPwr-3 CNC Control)
- 14.5″
- 3 HP
- 60–500-4200 RPM (Var)
- R-8 (NMTB-30 or Q.C. spindle optional) Optionsal?
- 3.375″
- 0.0015″ / 0.003″ / 0.006″ in/rev
- 0.75″ / 0.37″ diameter
- 6″ diameter
- 2.0 in³/min
- 850 lbs
- 3.3″ – 18.25″
- 5″ – 19.5″
- 2500 lbs
- 2800 lbs
- 72″ x 72″ (skid)
- 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp)
