32/43″ X 84″ cc TUDA JUMBO EIGHT GAP BED ENGINE LATHE
New 1980
Motor Driven with 20 HP, 3-Phase, 60 Cycle, AC Motor and Controls
EQUIPPED WITH: Hardened & Ground Bed Ways, Rapid Traverse, 20″ 4-Jaw Chuck, 4-Way Turret Toolpost, Steady Rest
SPECIFICATIONS:
| Swing Over Bed | 32″ |
| Swing In Gap | 43″ |
| Swing Over Cross Slide | 22″ |
| Max. Distance Between Centers | 84″ |
| Spindle Speeds (12) | 12 to 600 RPM |
| Spindle Nose | ASA-A2-11″ |
| Spindle Hole | 3-1/4″ |
| Taper Of Bore (Metric) | #100 |
| Longitudinal Feeds (40) | .062 to 1.727 mm/Min. |
| Cross Feeds (40) | .031 to .863 mm/Min. |
| Metric Threading (35) | 1 to 28 mm |
| Inch Threading (40) | 28 to 1 TPI |
| Module (29) | .5 to 14 mm |
| D.P. (40) | 56 to 2 |
| Carriage | |
| Travel of Tool Slide | 10″ |
| Travel of Cross Slide | 22″ |
| Weight Between Centers | 4,000 Lbs. |
| Width of Bed | 23″ |
| Center Height From Floor | 45″ |
| Approximate Dimensions | 182″ L x 65″ W |
| Approximate Weight | 14,300 Lbs. |
