17″ x 40″ KENT USA KLS-1740(II) ENGINE LATHE – NEW
PRODUCT HIGHLIGHTS
- 6 HP main spindle motor
- 12 speeds, all geared headstock
- Hardened and ground gears and bedways
- Centralized lube system in headstock
- Cast iron machine bedways and base
- Removable chip pan for easy clean up
- Foot brake and T-Slot compound
- Inch/metric ruler on tailstock quill
- ISO 9001 certified manufacturer
STANDARD ACCESSORIES
- 3-jaw chuck
- 4-jaw chuck
- Face plate
- Steady rest
- Follow rest
- Thread chasing dial toolbox with standard tools
OPTIONAL ACCESSORIES
- Digital readout system
- 5C lever style collet closer
- Royal spindle type live center
- Live center set with interchangeable tips
- BTC 3-jaw chuck with back plate
- Transformer for 440V power
- Rustlick lubricant
- Swing Over Bed
- Swing Over Cross Slide
- Swing Over Gap
- Width of Bed
- Distance Between Centers
- Cross Slide Travel
- Top Slide Travel
- Spindle Speeds
- Spindle Speed Range
- Through Hole Diameter
- Spindle Nose
- Spindle Bore Taper
- Standard (Whit-Worth)
- Metric Pitch
- Longitudinal Feeds
- Cross Feeds
- Leadscrew Diameter
- Thread Pitch
- Quill Travel
- Quill Diameter
- Quill Bore Taper
- Main Motor
- Coolant Pump Motor
- Overall Dimension
- Packing Dimension
- Net Weight
- Gross Weight
KLS-1740 (II)
- 17″
- 10.2″
- 22″
- 12-1/4″”
- 40″
- 9.26″
- 4
- 12
- 32-1800 RPM
- 2-1/32″
- D1-6 Camlock
- MT#6
- 65 (1-5/8 –72) TPI
- 28 (0.5–20) mm
- 0.0014”-0.0439” in/rev
- 0.0010”-0.0330” in/rev
- 1.33″
- 4 TPI
- 4-3/4″
- 2.36″
- MT#4
- 6 or 4 HP (2 Speed, 3 Phase)
- 1/8 HP
- 98″ x 40″ x 47″
- 108″ x 44″ x 62″
- 4090 LBS
- 4310 LBS
