12″ x 50″ KENT USA TW-32QI MANUAL BED MILL – NEW
PRODUCT FEATURES
- 7.5 HP spindle motor
- Programmable spindle rpm control
- Spindle rpm over-ride knob on control
- 60-6000 RPM without manual gear changes
- NST-40 or CAT-40 taper spindle available
- Enhanced flux-vector inverter on spindle drive
- Metal hand wheels on X-axis and Y-axis
- Full automatic CNC and manual/DRO mode capability
- Solid boxed ways on column and saddle ways
- Metal telescoping way cover on front Y-axis
- Auto lubrication unit with metered check valves
- Flood coolant with splash guard and chip pan
- Built-in coolant reservoir in machine base
- Overhead arm mounting of CNC control
- Halogen work light built-in for convenience
- DRO mode for manual machining capability
- Large 1.25” diameter precision ground ball screws
- Manual quill capability for greater flexibility
OPTIONAL ACCESSORIES
- Conversational CNC Control
- Programmable Spindle RPM and M-Function Option
- Spindle Override Knob on Control
- Flux-Vector AC-Frequency Drive Head
- Auto Lubrication System and Halogen Work Light
- Flood Coolant System
- Air-Power Draw Bar
- Chip Pan
- Table Size
- Table Travel (X-Axis)
- Saddle Travel (Y-Axis)
- Knee Travel (Z-Axis)
- Spindle Center to Column
- Spindle to Table
- Quill Travel
- Quill Diameter
- T-Slots (number x width)
- Coolant Pump
- Spindle Motor
- Spindle Taper
- Speed Range
- Quill Power Feed (per rev)
- Drilling Capacity (Manual)
- Drilling Capacity (Power)
- Boring Capacity
- Milling Capacity
- Maximum Work Load
- Net Weight
- Gross Weight
- Packing Dimension
- Power Requirements
TW-32QI
- 12″ x 50″
- 34″ (32″ w/ control)
- 20″ (18.5″ w/ control)
- 20″ (18.5″ w/ control)
- 20″
- 4″ to 24″
- 5.5″
- 4.173″
- 3 x 5/8″
- 0.25 HP
- 7.5 HP
- NST-40 or CAT-40
- 60-6000 RPM
- 0.0017″ / 0.0032″ / 0.0054″
- 1.25″
- 0.625″
- 8″ Diameter
- 2.5 in³/min
- 1000 lbs (distributed)
- 4200 lbs
- 4500 lbs
- 72″ x 86″ x 88″
- 220 volts, 60 Hz, 3-phase, 30 Amps
